(0 items)
GARR GARR 50276
GARR V4R 1/2x4.2F Center Cutting High Performance Single End End Mill With Neck, 1/2 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, AlCrN Coated
Factory Order
GARR End Mill, Center Cutting High Performance Single End, Series: V4R, 1/2 in Diameter Cutter, 0.02 in Corner Radius, 4 in Overall Length, 5/8 in Length of Cut, 4 Flutes, Spiral Flute, 1/2 in Shank Diameter, Right Hand Cutting Direction, Weld-On Flat Shank, Submicron Grain Solid Carbide, AlCrN Coated
Features
- Special edge prep enhances tool life by 20%
- Minimizes burr on part
- Helix geometry varies over length of flutes
- Variable flute design helps with chip evacuation in slots and pockets
- Variable rake aids in chip formation
- PCT (polish carbide treatment) enhances tool life by 20%
- For titanium, inconel and steels (<40 RC
- Corner radius tolerance +/-0.001 in (+/-0.025 mm)
Specifications
ApplicationFor titanium, inconel and steels <40Rc
Type Center Cutting High Performance Single End
Series V4R
Cutter Diameter 1/2 in
Corner Radius 0.02 in
Overall Length 4 in
Length of Cut 5/8 in
Number of Flutes 4
Flute Type Spiral
Shank Diameter 1/2 in
Cutting Direction Right Hand
Specification Sheet
