GARR GARR 50277
GARR V4R 5/8.02 F Center Cutting High Performance Single End End Mill, 5/8 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlCrN Coated
GARR End Mill, Center Cutting High Performance Single End, Series: V4R, 5/8 in Diameter Cutter, 0.02 in Corner Radius, 3-1/2 in Overall Length, 1-1/4 in Length of Cut, 4 Flutes, Spiral Flute, 5/8 in Shank Diameter, Right Hand Cutting Direction, Weld-On Flat Shank, Submicron Grain Solid Carbide, AlCrN Coated
Features
- Special edge prep enhances tool life by 20%
- Minimizes burr on part
- Helix geometry varies over length of flutes
- Variable flute design helps with chip evacuation in slots and pockets
- Variable rake aids in chip formation
- PCT (polish carbide treatment) enhances tool life by 20%
- For titanium, inconel and steels (<40 RC
- Corner radius tolerance +/-0.001 in (+/-0.025 mm)
Specifications
Type Center Cutting High Performance Single End
Series V4R
Cutter Diameter 5/8 in
Corner Radius 0.02 in
Overall Length 3-1/2 in
Length of Cut 1-1/4 in
Number of Flutes 4
Flute Type Spiral
Shank Diameter 5/8 in
Cutting Direction Right Hand