Dixon® 2-Bolt Clamp, Series: Boss™, 1-20/64 to 1-32/64 in Nominal, 2-3/4 in Length, 2-7/8 in Width, 21 ft-lb, Iron Band, Zinc Plated
Features
- 2-bolt type clamp with 2 gripping fingers and 2 clamp sections
- Bolts in Boss™ clamps are designed to bend as they are tightened, this allows the clamp to conform to the hose outside diameter
- Always tighten bolts to their specified torque value
- Periodic re-tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses
- The bolts used in the boss interlocking clamps are not standard bolts
- They vary from standard bolts in their length, diameter, overall thread length and material hardness
- These bolts can be retorqued, but it is not recommended that the bolts or clamps be reused, as they are designed for a single bend only
- Torque values for clamps are based on dry bolts, the use of lubricant on bolts will adversely effect clamp performance
- Worn-out hose couplings can be dangerous
- They should be checked regularly and replace when necessary
Specifications
Series Boss™
Nominal Size 1-20/64 to 1-32/64 in Hose
Length 2-3/4 in
Width 2-7/8 in