(0 items)
Sandvik Coromant SANC 14809
Sandvik Coromant 5735366 CoroMill 331 Milling Insert, ANSI Code: L331.1A-04 35 15H-WL1030, R/L331.1A..H-WL Insert, 43515 Insert, Carbide, Manufacturers Grade: 1030, Rectangle Shape, Material Grade: M, P, S
Factory Order
Sandvik Coromant Milling Insert, Series: CoroMill 331, R/L331.1A..H-WL Insert, 43515 Insert, Rectangle Shape, 0.2 in Inscribed Circle, 0.138 in Thickness, 0.374 in Width, 0.2 in Length, WL Chipbreaker, 0.06 in Corner Radius, Positive Rake, 90 deg Lead Angle, 0.1023 in Diameter Hole, Manufacturers Grade: 1030, ANSI Code: L331.1A-04 35 15H-WL1030, ISO Code: L331.1A-04 35 15H-WL1030, Left Hand of Insert, Carbide, PVD-TiAlN Coated, Material Grade: M, P, S, Steel, Stainless Steel and Heat Resistant Super Alloys Material Application
Features
- 0 deg body machine side
- 0 deg body workpiece side
- Without coolant entry
- No coolant exit
- 0 deg inclination
- 91 deg cutting edge
- 0 deg maximum ramping
- 20 life cycle state
- 14.9 mm maximum overhang
- 0.9 Nm torque
Specifications
ApplicationLight, Side and Face Milling
ANSI CodeL331.1A-04 35 15H-WL1030
ChipbreakerWL
Corner Radius0.06 in
FinishPVD-TiAlN Coated
Hand of InsertLeft
Hole Diameter0.1023 in
Inscribed Circle0.2 in
Insert Size43515
Insert StyleR/L331.1A..H-WL
ISO CodeL331.1A-04 35 15H-WL1030
Lead Angle90 deg
Length0.2 in
Manufacturers Grade1030
MaterialCarbide
Material ApplicationSteel, Stainless Steel and Heat Resistant Super Alloys
Material GradeM, P, S
RakePositive
SeriesCoroMill 331
ShapeRectangle
Thickness0.138 in
Width0.374 in
