Sandvik Coromant SANC 15846
Sandvik Coromant 5853455 CoroMill 300 Milling Insert, R300..M-PH Insert, 1648 Insert, Carbide, Manufacturers Grade: S40T, Round Shape, Material Grade: S
Sandvik Coromant Milling Insert, Series: CoroMill 300, R300..M-PH Insert, 1648 Insert, Round, 0.63 in Inscribed Circle, 0.187 in Thickness, PH Chipbreaker, 0.315 in Corner Radius, Positive Rake, 0.2244 in Hole Dia, Manufacturers Grade: S40T, ISO Code: R300-1648M-PH S40T, Neutral Hand, Carbide, CVD-TiCN+Al2O3+TiN Coated, Material Grade: S, Heat Resistant Alloys Material Application
Features
- 0 deg body workpiece side
- 20 life cycle state
- Without coolant entry
- No coolant exit
- 90 deg cutting edge
- 22.352 mm minimum overhang
- 3.5 Nm torque
- 0 deg inclination
- 0 deg rake
Specifications
ApplicationHeavy, Full Slot Milling, Face Milling, Ramping, Profiling and Pocket Milling
ChipbreakerPH
Corner Radius0.315 in
FinishCVD-TiCN+Al2O3+TiN Coated
Hand of InsertNeutral
Hole Diameter0.2244 in
Inscribed Circle0.63 in
Insert Size1648
Insert StyleR300..M-PH
ISO CodeR300-1648M-PH S40T
Manufacturers GradeS40T
MaterialCarbide
Material ApplicationHeat Resistant Alloys
Material GradeS
RakePositive
SeriesCoroMill 300
ShapeRound
Thickness0.187 in