Directools.com

In Stock:

GARR GARR 59445

GARR 59445 1500 Hard Metal Straight Flute Drill Bit, #11 Drill - Wire, 0.191 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59445 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59446

GARR 59446 1500H Hard Metal Straight Flute Drill Bit, #11 Drill - Wire, 0.191 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59446 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59450

GARR 59450 1500 General Purpose Hard Metal Straight Flute Drill Bit, #10 Drill - Wire, 0.1935 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59450 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59451

GARR 59451 1500H General Purpose Hard Metal Straight Flute Drill Bit, #10 Drill - Wire, 0.1935 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59451 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59455

GARR 59455 1500 General Purpose Hard Metal Straight Flute Drill Bit, #9 Drill - Wire, 0.196 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59455 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59456

GARR 59456 1500H General Purpose Hard Metal Straight Flute Drill Bit, #9 Drill - Wire, 0.196 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59456 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59465

GARR 59465 1500 General Purpose Hard Metal Straight Flute Drill Bit, #8 Drill - Wire, 0.199 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59465 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59466

GARR 59466 1500H General Purpose Hard Metal Straight Flute Drill Bit, #8 Drill - Wire, 0.199 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59466 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59470

GARR 59470 1500 Hard Metal Straight Flute Drill Bit, #7 Drill - Wire, 0.201 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59470 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59471

GARR 59471 1500H Hard Metal Straight Flute Drill Bit, #7 Drill - Wire, 0.201 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59471 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59475

GARR 59475 1500 General Purpose Hard Metal Straight Flute Drill Bit, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59475 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59476

GARR 59476 1500H General Purpose Hard Metal Straight Flute Drill Bit, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59476 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59480

GARR 59480 1500 General Purpose Hard Metal Straight Flute Drill Bit, #6 Drill - Wire, 0.204 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59480 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59481

GARR 59481 1500H General Purpose Hard Metal Straight Flute Drill Bit, #6 Drill - Wire, 0.204 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59481 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59485

GARR 59485 1500 General Purpose Hard Metal Straight Flute Drill Bit, #5 Drill - Wire, 0.2055 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59485 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59486

GARR 59486 1500H General Purpose Hard Metal Straight Flute Drill Bit, #5 Drill - Wire, 0.2055 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59486 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59490

GARR 59490 1500 General Purpose Hard Metal Straight Flute Drill Bit, #4 Drill - Wire, 0.209 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59490 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59491

GARR 59491 1500H General Purpose Hard Metal Straight Flute Drill Bit, #4 Drill - Wire, 0.209 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59491 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59495

GARR 59495 1500 General Purpose Hard Metal Straight Flute Drill Bit, #3 Drill - Wire, 0.213 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59495 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59496

GARR 59496 1500H General Purpose Hard Metal Straight Flute Drill Bit, #3 Drill - Wire, 0.213 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59496 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59505

GARR 59505 1500 Hard Metal Straight Flute Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59505 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59506

GARR 59506 1500H General Purpose Hard Metal Straight Flute Drill Bit, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59506 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59510

GARR 59510 1500 General Purpose Hard Metal Straight Flute Drill Bit, #2 Drill - Wire, 0.221 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59510 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59511

GARR 59511 1500H General Purpose Hard Metal Straight Flute Drill Bit, #2 Drill - Wire, 0.221 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59511 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59515

GARR 59515 1500 General Purpose Hard Metal Straight Flute Drill Bit, #1 Drill - Wire, 0.228 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59515 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59516

GARR 59516 1500H General Purpose Hard Metal Straight Flute Drill Bit, #1 Drill - Wire, 0.228 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59516 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59525

GARR 59525 1500 Hard Metal Straight Flute Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59525 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59526

GARR 59526 1500H General Purpose Hard Metal Straight Flute Drill Bit, 15/64 in Drill - Fraction, 0.2344 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59526 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59550

GARR 59550 1500 Hard Metal Straight Flute Drill Bit, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59550 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59551

GARR 59551 1500H Hard Metal Straight Flute Drill Bit, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59551 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59570

GARR 59570 1500 Hard Metal Straight Flute Drill Bit, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59570 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59571

GARR 59571 1500H General Purpose Hard Metal Straight Flute Drill Bit, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59571 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59600

GARR 59600 1500 Hard Metal Straight Flute Drill Bit, 9/32 in Drill - Fraction, 0.2812 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59600 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59601

GARR 59601 1500H Hard Metal Straight Flute Drill Bit, 9/32 in Drill - Fraction, 0.2812 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59601 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59620

GARR 59620 1500 Hard Metal Straight Flute Drill Bit, 19/64 in Drill - Fraction, 0.2969 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59620 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59621

GARR 59621 1500H General Purpose Hard Metal Straight Flute Drill Bit, 19/64 in Drill - Fraction, 0.2969 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59621 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59630

GARR 59630 1500 Hard Metal Straight Flute Drill Bit, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59630 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59631

GARR 59631 1500H Hard Metal Straight Flute Drill Bit, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59631 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59650

GARR 59650 1500 General Purpose Hard Metal Straight Flute Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59650 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59651

GARR 59651 1500H General Purpose Hard Metal Straight Flute Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59651 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59671

GARR 59671 1500H General Purpose Hard Metal Straight Flute Drill Bit, 11/32 in Drill - Fraction, 0.3438 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59671 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59690

GARR 59690 1500 General Purpose Hard Metal Straight Flute Drill Bit, 23/64 in Drill - Fraction, 0.3594 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59690 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59691

GARR 59691 1500H General Purpose Hard Metal Straight Flute Drill Bit, 23/64 in Drill - Fraction, 0.3594 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59691 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59705

GARR 59705 1500 Hard Metal Straight Flute Drill Bit, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59705 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59706

GARR 59706 1500H General Purpose Hard Metal Straight Flute Drill Bit, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59706 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59720

GARR 59720 1500 Hard Metal Straight Flute Drill Bit, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59720 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59721

GARR 59721 1500H General Purpose Hard Metal Straight Flute Drill Bit, 25/64 in Drill - Fraction, 0.3906 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59721 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59740

GARR 59740 1500 Hard Metal Straight Flute Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59740 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59741

GARR 59741 1500H General Purpose Hard Metal Straight Flute Drill Bit, 13/32 in Drill - Fraction, 0.4062 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59741 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59755

GARR 59755 1500 General Purpose Hard Metal Straight Flute Drill Bit, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59755 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59756

GARR 59756 1500H General Purpose Hard Metal Straight Flute Drill Bit, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59756 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59765

GARR 59765 1500 Hard Metal Straight Flute Drill Bit, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59765 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59766

GARR 59766 1500H General Purpose Hard Metal Straight Flute Drill Bit, 7/16 in Drill - Fraction, 0.4375 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59766 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59775

GARR 59775 1500 Hard Metal Straight Flute Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59775 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59776

GARR 59776 1500H General Purpose Hard Metal Straight Flute Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59776 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59780

GARR 59780 1500 Hard Metal Straight Flute Drill Bit, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59780 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59781

GARR 59781 1500H General Purpose Hard Metal Straight Flute Drill Bit, 15/32 in Drill - Fraction, 0.4688 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59781 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59790

GARR 59790 1500 General Purpose Hard Metal Straight Flute Drill Bit, 31/64 in Drill - Fraction, 0.4844 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59790 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59791

GARR 59791 1500H General Purpose Hard Metal Straight Flute Drill Bit, 31/64 in Drill - Fraction, 0.4844 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59791 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59800

GARR 59800 1500 Hard Metal Straight Flute Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59800 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 59801

GARR 59801 1500H Hard Metal Straight Flute Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Submicron Grain Solid Carbide

Manufacturer PN: 59801 | UNSPSC: 23241605

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60010

GARR 60010 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/16 in Dia Head, 5/8 in L of Cut

Manufacturer PN: 60010 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60012

GARR 60012 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/16 in Dia Head, 5/8 in L of Cut, Double Cut

Manufacturer PN: 60012 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60020

GARR 60020 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1/4 in Dia Head, 5/8 in L of Cut

Manufacturer PN: 60020 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60021

GARR 60021 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1/4 in Dia Head, 5/8 in L of Cut, Aluminum Cut

Manufacturer PN: 60021 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60022

GARR 60022 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut

Manufacturer PN: 60022 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60030

GARR 60030 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 5/16 in Dia Head, 3/4 in L of Cut

Manufacturer PN: 60030 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60032

GARR 60032 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 5/16 in Dia Head, 3/4 in L of Cut, Double Cut

Manufacturer PN: 60032 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60040

GARR 60040 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/8 in Dia Head, 3/4 in L of Cut

Manufacturer PN: 60040 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60041

GARR 60041 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/8 in Dia Head, 3/4 in L of Cut, Aluminum Cut

Manufacturer PN: 60041 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60042

GARR 60042 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/8 in Dia Head, 3/4 in L of Cut, Double Cut

Manufacturer PN: 60042 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60050

GARR 60050 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 7/16 in Dia Head, 1 in L of Cut

Manufacturer PN: 60050 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60052

GARR 60052 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 7/16 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74024 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60060

GARR 60060 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1/2 in Dia Head, 1 in L of Cut

Manufacturer PN: 74025 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60061

GARR 74028 Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1/2 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 74028 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60062

GARR 60062 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1/2 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74029 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60070

GARR 60070 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 5/8 in Dia Head, 1 in L of Cut

Manufacturer PN: 74030 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60071

GARR 74031 Standard Rotary File/Burr, Cylindrical Without End Cut Head, 5/8 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 74031 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60072

GARR 60072 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 5/8 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74032 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60080

GARR 60080 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/4 in Dia Head, 1 in L of Cut

Manufacturer PN: 74033 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60081

GARR Black Maxi-Sharp 60081 SA Series Flat File, Cylindrical - No End Cut (Shape SA) Head, 3/4 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 60081 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60082

GARR 74034 Standard Rotary File/Burr, Cylindrical Without End Cut Head, 3/4 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74034 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60090

GARR 60090 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1 in Dia Head, 1 in L of Cut

Manufacturer PN: 74037 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60091

GARR 60091 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 74038 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60092

GARR 60092 SA Series Standard Rotary File/Burr, Cylindrical Without End Cut Head, 1 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74039 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60100

GARR 60100 VRX-6 VS6 Center Cutting High Performance Square End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60100 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60102

GARR 60102 VR6 Center Cutting High Performance Corner Radius End Mill, 1/4 in Dia Cutter, 0.01 in Corner Radius, 3/4 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60102 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60104

GARR 60104 VR6 Center Cutting High Performance Corner Radius End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60104 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60106

GARR 60106 VR6 Center Cutting High Performance Corner Radius End Mill, 1/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 6 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60106 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60108

GARR 60108 VRX-6 VS6 Center Cutting High Performance Square End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 6 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60108 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60110

GARR 60110 VR6 Center Cutting High Performance Corner Radius End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 7/8 in Length of Cut, 6 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60110 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60112

GARR 60112 VR6 Center Cutting High Performance Corner Radius End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 7/8 in Length of Cut, 6 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60112 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60114

GARR 60114 VR6 Center Cutting High Performance Corner Radius End Mill, 3/8 in Dia Cutter, 0.06 in Corner Radius, 7/8 in Length of Cut, 6 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60114 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60116

GARR 60116 VRX-6 VS6 Center Cutting High Performance Square End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60116 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60118

GARR 60118 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.01 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60118 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60120

GARR 60120 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60120 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60122

GARR 60122 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60122 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60124

GARR 60124 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60124 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60126

GARR 60126 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60126 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60128

GARR 60128 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 1/8 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 60128 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60130

GARR 60130 VRX-6 VS6 Center Cutting High Performance Square End Mill, 1/2 in Dia Cutter, 2-1/8 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60130 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60132

GARR 60132 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.01 in Corner Radius, 2-1/8 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60132 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60134

GARR 60134 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 2-1/8 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60134 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60136

GARR 60136 VR6 Center Cutting High Performance Corner Radius End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 2-1/8 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60136 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60138

GARR 60138 VRX-6 VS6 Center Cutting High Performance Square End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60138 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60140

GARR 60140 VR6 Center Cutting High Performance Corner Radius End Mill, 5/8 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60140 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60142

GARR 60142 VR6 Center Cutting High Performance Corner Radius End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60142 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60144

GARR 60144 VR6 Center Cutting High Performance Corner Radius End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60144 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60146

GARR 60146 VR6 Center Cutting High Performance Corner Radius End Mill, 5/8 in Dia Cutter, 1/8 in Corner Radius, 1-1/4 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, AlTiN Coated

Manufacturer PN: 60146 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60148

GARR 60148 VRX-6 VS6 Center Cutting High Performance Square End Mill, 5/8 in Dia Cutter, 1-5/8 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60148 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60150

GARR 60150 VR6 Center Cutting High Performance Corner Radius End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 6 Flutes, 5/8 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60150 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60152

GARR 60152 VRX-6 VS6 Center Cutting High Performance Square End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60152 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60154

GARR 60154 VR6 Center Cutting High Performance Corner Radius End Mill, 3/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60154 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60156

GARR 60156 VR6 Center Cutting High Performance Corner Radius End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60156 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60158

GARR 60158 VR6 Center Cutting High Performance Corner Radius End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60158 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60160

GARR 60160 VR6 Center Cutting High Performance Corner Radius End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4 in OAL, AlTiN Coated

Manufacturer PN: 60160 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60162

GARR 60162 VRX-6 VS6 Center Cutting High Performance Square End Mill, 8 mm Dia Cutter, 22 mm Length of Cut, 6 Flutes, 8 mm Dia Shank, 65 mm OAL, AlTiN Coated

Manufacturer PN: 60162 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60164

GARR 60164 VRX-6 VS6 Center Cutting High Performance Square End Mill, 10 mm Dia Cutter, 22 mm Length of Cut, 6 Flutes, 10 mm Dia Shank, 70 mm OAL, AlTiN Coated

Manufacturer PN: 60164 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60166

GARR 60123 VRX-6 VS6 Center Cutting High Performance Square End Mill, 12 mm Dia Cutter, 32 mm Length of Cut, 6 Flutes, 12 mm Dia Shank, 75 mm OAL, AlTiN Coated

Manufacturer PN: 60166 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 60168

GARR 60168 VRX-6 VS6 Center Cutting High Performance Square End Mill, 16 mm Dia Cutter, 32 mm Length of Cut, 6 Flutes, 16 mm Dia Shank, 88 mm OAL, AlTiN Coated

Manufacturer PN: 60168 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61010

GARR 61010 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/16 in Dia Head, 5/8 in L of Cut

Manufacturer PN: 74043 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61012

GARR 61012 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/16 in Dia Head, 5/8 in L of Cut, Double Cut

Manufacturer PN: 74044 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61020

GARR 61020 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 1/4 in Dia Head, 5/8 in L of Cut

Manufacturer PN: 74042 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61021

GARR 61021 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 1/4 in Dia Head, 5/8 in L of Cut, Aluminum Cut

Manufacturer PN: 74045 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61022

GARR 61022 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 1/4 in Dia Head, 5/8 in L of Cut, Double Cut

Manufacturer PN: 74046 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61030

GARR 61030 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 5/16 in Dia Head, 3/4 in L of Cut

Manufacturer PN: 74047 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61032

GARR 61032 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 5/16 in Dia Head, 3/4 in L of Cut, Double Cut

Manufacturer PN: 74048 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61040

GARR 61040 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/8 in Dia Head, 3/4 in L of Cut

Manufacturer PN: 74049 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61041

GARR 74050 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/8 in Dia Head, 3/4 in L of Cut, Aluminum Cut

Manufacturer PN: 74050 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61042

GARR 61042 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/8 in Dia Head, 3/4 in L of Cut, Double Cut

Manufacturer PN: 74051 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61050

GARR 61050 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut

Manufacturer PN: 74052 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61052

GARR 61052 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74057 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61060

GARR 61060 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut

Manufacturer PN: 74058 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61061

GARR 61061 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 74061 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61062

GARR 61062 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74062 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61070

GARR 61070 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 5/8 in Dia Head, 1 in L of Cut

Manufacturer PN: 74063 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61071

GARR 61071 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 5/8 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 74064 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61072

GARR 61072 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 5/8 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74065 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61073

GARR 61073 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.03 in Corner Radius, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61073 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61074

GARR 61074 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.03 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61074 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61075

GARR 61075 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61075 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61076

GARR 61076 VRX Center Cutting High Performance Corner Radius End Mill, 5/32 in Dia Cutter, 0.03 in Corner Radius, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61076 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61077

GARR 61077 VB VRX Center Cutting High Performance Ball End Mill, 5/32 in Dia Cutter, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61077 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61078

GARR 61078 VRX Center Cutting High Performance Corner Radius End Mill, 5/32 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61078 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61079

GARR 61079 VB VRX Center Cutting High Performance Ball End Mill, 5/32 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61079 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61080

GARR 61080 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/4 in Dia Head, 1 in L of Cut

Manufacturer PN: 74066 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61081

GARR 61081 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/4 in Dia Head, 1 in L of Cut, Aluminum Cut

Manufacturer PN: 74067 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61082

GARR 61082 SC Series Standard Rotary File/Burr, Radius End, Cylindrical Head, 3/4 in Dia Head, 1 in L of Cut, Double Cut

Manufacturer PN: 74068 | UNSPSC: 23251706

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61084

GARR 61084 VRX VS Center Cutting High Performance Square End Mill, 1.5 mm Dia Cutter, 3 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61084 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61086

GARR 61086 VRX Center Cutting High Performance Corner Radius End Mill, 1.5 mm Dia Cutter, 0.2 mm Corner Radius, 3 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61086 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61088

GARR 61088 VB VRX Center Cutting High Performance Ball End Mill, 1.5 mm Dia Cutter, 3 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61088 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61090

GARR 61090 VRX VS Center Cutting High Performance Square End Mill, 1.5 mm Dia Cutter, 6 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61090 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61092

GARR 61092 VRX Center Cutting High Performance Corner Radius End Mill, 1.5 mm Dia Cutter, 0.2 mm Corner Radius, 6 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61092 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61094

GARR 61094 VB VRX Center Cutting High Performance Ball End Mill, 1.5 mm Dia Cutter, 6 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61094 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61096

GARR 61096 VRX VS Center Cutting High Performance Stub Length Square End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61096 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61098

GARR 61098 VRX Center Cutting High Performance Corner Radius End Mill, 1/16 in Dia Cutter, 0.01 in Corner Radius, 1/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61098 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61100

GARR 61100 VB VRX Center Cutting High Performance Ball End Mill, 1/16 in Dia Cutter, 1/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61100 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61102

GARR 61102 VRX VS Center Cutting High Performance Standard Length Square End Mill, 1/16 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61102 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61104

GARR 61104 VRX Center Cutting High Performance Corner Radius End Mill, 1/16 in Dia Cutter, 0.01 in Corner Radius, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61104 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61106

GARR 61106 VB VRX Center Cutting High Performance Ball End Mill, 1/16 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61106 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61108

GARR 61108 VRX VS Center Cutting High Performance Stub Length Square End Mill, 2 mm Dia Cutter, 4 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61108 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61110

GARR 61110 VRX Center Cutting High Performance Corner Radius End Mill, 2 mm Dia Cutter, 0.2 mm Corner Radius, 4 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61110 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61112

GARR 61112 VB VRX Center Cutting High Performance Ball End Mill, 2 mm Dia Cutter, 4 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61112 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61114

GARR 61114 VRX VS Center Cutting High Performance Standard Length Square End Mill, 2 mm Dia Cutter, 8 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61114 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61116

GARR 61116 VRX Center Cutting High Performance Corner Radius End Mill, 2 mm Dia Cutter, 0.2 mm Corner Radius, 8 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61116 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61118

GARR 61118 VB VRX Center Cutting High Performance Ball End Mill, 2 mm Dia Cutter, 8 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 38 mm OAL, AlTiN Coated

Manufacturer PN: 61118 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61120

GARR 61120 VRX VS Center Cutting High Performance Stub Length Square End Mill, 3/32 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61120 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61122

GARR 61122 VRX Center Cutting High Performance Corner Radius End Mill, 3/32 in Dia Cutter, 0.01 in Corner Radius, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61122 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61124

GARR 61124 VB VRX Center Cutting High Performance Ball End Mill, 3/32 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61124 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61126

GARR 61126 VRX VS Center Cutting High Performance Standard Length Square End Mill, 3/32 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61126 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61128

GARR 61128 VRX Center Cutting High Performance Corner Radius End Mill, 3/32 in Dia Cutter, 0.01 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61128 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61130

GARR 61130 VB VRX Center Cutting High Performance Ball End Mill, 3/32 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61130 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61132

GARR 61132 VRX Center Cutting High Performance Corner Radius End Mill, 3 mm Dia Cutter, 0.3 mm Corner Radius, 8 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 50 mm OAL, AlTiN Coated

Manufacturer PN: 61132 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61134

GARR 61134 VB VRX Center Cutting High Performance Ball End Mill, 3 mm Dia Cutter, 8 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 50 mm OAL, AlTiN Coated

Manufacturer PN: 61134 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61136

GARR 61136 VRX Center Cutting High Performance Corner Radius End Mill, 3 mm Dia Cutter, 0.3 mm Corner Radius, 12 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 50 mm OAL, AlTiN Coated

Manufacturer PN: 61136 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61138

GARR 61138 VB VRX Center Cutting High Performance Ball End Mill, 3 mm Dia Cutter, 12 mm Length of Cut, 4 Flutes, 3 mm Dia Shank, 50 mm OAL, AlTiN Coated

Manufacturer PN: 61138 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61140

GARR 61140 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61140 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61142

GARR 61142 VB VRX Center Cutting High Performance Ball End Mill, 1/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61142 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61144

GARR 61144 VRX VS Center Cutting High Performance Square End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61144 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61146

GARR 61146 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.01 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61146 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61148

GARR 61148 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61148 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61149

GARR 61149 VB VRX Center Cutting High Performance Ball End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61149 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61150

GARR 61150 VRX Center Cutting High Performance Corner Radius End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61150 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61152

GARR 61152 VB VRX Center Cutting High Performance Ball End Mill, 1/8 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN Coated

Manufacturer PN: 61152 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61154

GARR 61154 VRX VS Center Cutting High Performance Stub Length Square End Mill, 5/32 in Dia Cutter, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61154 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61156

GARR 61156 VRX Center Cutting High Performance Corner Radius End Mill, 5/32 in Dia Cutter, 0.015 in Corner Radius, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61156 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61158

GARR 61158 VRX VS Center Cutting High Performance Square End Mill, 5/32 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61158 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61160

GARR 61160 VRX Center Cutting High Performance Corner Radius End Mill, 5/32 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61160 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61162

GARR 61162 VRX VS Center Cutting High Performance Square End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 50 mm OAL, AlTiN Coated

Manufacturer PN: 61162 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61164

GARR 61164 VRX Center Cutting High Performance Corner Radius End Mill, 4 mm Dia Cutter, 0.5 mm Corner Radius, 8 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 50 mm OAL, AlTiN Coated

Manufacturer PN: 61164 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61166

GARR 61166 VRX VS Center Cutting High Performance Square End Mill, 4 mm Dia Cutter, 19 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 65 mm OAL, AlTiN Coated

Manufacturer PN: 61166 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61168

GARR 61168 VRX Center Cutting High Performance Corner Radius End Mill, 4 mm Dia Cutter, 0.3 mm Corner Radius, 19 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 65 mm OAL, AlTiN Coated

Manufacturer PN: 61168 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61170

GARR 61170 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61170 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61172

GARR 61172 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.02 in Corner Radius, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61172 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61174

GARR 61174 VRX VS Center Cutting High Performance Square End Mill, 3/16 in Dia Cutter, 7/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61174 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61176

GARR 61176 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.01 in Corner Radius, 7/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61176 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61178

GARR 61170 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 7/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61178 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61180

GARR 61180 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 9/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61180 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61182

GARR 61182 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 9/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, AlTiN Coated

Manufacturer PN: 61182 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

GARR GARR 61184

GARR 61184 VRX Center Cutting High Performance Corner Radius End Mill, 3/16 in Dia Cutter, 0.01 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 3 in OAL, AlTiN Coated

Manufacturer PN: 61184 | UNSPSC: 27112803

- /EA

In Stock: -

QTY:

- /EA

In Stock: -

QTY:

78 79 80 81 82

Your Part Number	Quantity










Save list as CSV