(0 items)
Hannibal HANN 60010
Hannibal 60010 600F Material Specific Jobber Length Drill Bit, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 118 deg Point, Tool Steel
In stock
(3)
Hannibal Jobber Length Drill Bit, Material Specific, Series: 600F, Imperial, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 3-1/8 in Overall Length, 2 in Cutting Depth, Spiral Flute, 2 in Flute Length, Flat/Tanged Shank, 118 deg Point, Standard Point, Carbide Cutting Edge, No Through Coolant, Tool Steel, Applicable Materials: Cast Iron and Non-Ferrous Materials
Features
- Drills are end cutting tools used to produce holes when rapid removal of material is desired
- Twist drills are generally effective in holes up to 3 tool diameters deep, peck cycles should be used for deeper holes to achieve better chip evacuation
- Carbide tip high temperature brazed to hardened tool steel body
- Smooth flutes for effective chip flow
- Precision ground to insure concentricity of tip and body
- The most popular carbide tipped drill will perform satisfactorily under a variety of conditions
Specifications
Applicable MaterialsCast Iron and Non-Ferrous Materials
Cutting Depth2 in
Cutting Edge MaterialCarbide
Drill Diameter Measurement SystemImperial
Drill Size - Decimal Inch0.1562 in
Drill Size - Fraction5/32 in
Flute Length2 in
Flute TypeSpiral
MaterialTool Steel
Overall Length3-1/8 in
Point Angle118 deg
Point TypeStandard
Series600F
Shank TypeFlat/Tanged
Through Coolant (Yes/No)No
TypeMaterial Specific
