Sandvik Coromant SANC 41072
Sandvik Coromant 6259490 CoroMill Plura Square Shoulder End Mill, 0.098 in Dia Cutter, 0.137 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 1.968 in OAL, PVD Coated
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill Plura, 0.098 in Cutter Dia, 1.968 in Overall Length, 0.137 in Length of Cut, 2 Flutes, 0.236 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 1P220-0250-XA 1630, ISO Code: 1P220-0250-XA 1630, Solid Carbide, PVD Coated
Features
- 1630 manufacturer grade
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- 30 deg body half taper
- Center cutting capability
- 1.4 mm Dia core at face
- 0.08 mm W corner chamfer
- 2 cutting length
- Without coolant entry
- No coolant exit
Specifications
ANSI Code1P220-0250-XA 1630
Cutter Diameter0.098 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO Code1P220-0250-XA 1630
Length of Cut0.137 in
MaterialSolid Carbide
Number of Flutes2
Overall Length1.968 in
SeriesCoroMill Plura
Shank Diameter0.236 in
Shank TypeCylindrical
TypeSquare