Sandvik Coromant SANC 41380
Sandvik Coromant 6259797 CoroMill Plura Square Shoulder End Mill, 0.275 in Dia Cutter, 0.767 in Length of Cut, 3 Flutes, 0.314 in Dia Shank, 2.48 in OAL, PVD Coated
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill Plura, 0.275 in Cutter Dia, 2.48 in Overall Length, 0.767 in Length of Cut, 3 Flutes, 0.314 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 1P251-0700-XA 1630, ISO Code: 1P251-0700-XA 1630, Solid Carbide, PVD Coated
Features
- 1630 manufacturer grade
- 0.7 mm maximum working engagement
- 1 maximum working engagement ratio
- 30 deg body half taper
- Center cutting capability
- 3.92 mm Dia core at face
- 0.13 mm W corner chamfer
- 5 cutting length
- Without coolant entry
- No coolant exit
Specifications
ANSI Code1P251-0700-XA 1630
Cutter Diameter0.275 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO Code1P251-0700-XA 1630
Length of Cut0.767 in
MaterialSolid Carbide
Number of Flutes3
Overall Length2.48 in
SeriesCoroMill Plura
Shank Diameter0.314 in
Shank TypeCylindrical
TypeSquare