Sandvik Coromant SANC 41385
Sandvik Coromant 6259800 CoroMill Plura Square Shoulder End Mill, 0.354 in Dia Cutter, 0.846 in Length of Cut, 3 Flutes, 0.393 in Dia Shank, 2.834 in OAL, PVD Coated
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill Plura, 0.354 in Diameter Cutter, 2.834 in Overall Length, 0.846 in Length of Cut, 3 Flutes, 0.393 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Weldon Flat Shank, ANSI Code: 1P251-0900-XB 1630, ISO Code: 1P251-0900-XB 1630, Solid Carbide, PVD Coated
Features
- 1630 manufacturer grade
- 8.4 mm H shank
- 0.7 mm maximum working engagement
- 1 maximum working engagement ratio
- 30 deg body half taper
- Center cutting capability
- 5.04 mm Dia core at face
- 0.2 mm W corner chamfer
- 5 cutting length
- Without coolant entry
Specifications
ANSI Code1P251-0900-XB 1630
Cutter Diameter0.354 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO Code1P251-0900-XB 1630
Length of Cut0.846 in
MaterialSolid Carbide
Number of Flutes3
Overall Length2.834 in
SeriesCoroMill Plura
Shank Diameter0.393 in
Shank TypeWeldon Flat
TypeSquare