Dormer UTD 0182291
Dormer 0182291 Conical Square Drive Taper Pin Hand Reamer, 3/32 in Taper Pin, 2.38 mm Dia Reamer, 1.75 mm Dia Small End, Straight Flute, Square Shank
Dormer Taper Pin Hand Reamer, Conical Square Drive, Series: B301, Taper Pin Size/Number: 3/32 in, 2.38 mm Dia Reamer, 1.75 mm Small End Diameter, 57 mm Overall Length, Square Shank, 2.41 mm Shank Diameter, 4 Flutes, Straight Flute, 32 mm Flute Length, HSS, Bright/Steam Oxide, Right Hand Cutting Direction, Applicable Materials: Alloy Steel/Aluminum/Brass/Bronze/Carbon Steel/Cast Iron/Copper/Copper Alloy/Free Machining Stainless Steel/Hardened Steel/Magnesium/Nickel/Thermosetting Plastic/Titanium/Titanium Alloy
Features
- Straight flute reamers are the most common and used in general purpose though-hole applications
- Designed to convert a straight hole into a tapered hole into which standard taper pins will fit
- The square on the shank is suitable for holding a tap wrench or vise, depending on whether the reamer or part is rotating, making them ideal for hand use
- Steam tempering gives a strongly adhering blue oxide surface that acts to retain cutting fluid and prevent chip to tool welding, thereby counteracting the formation of a built-up edge
- Steam tempering can be applied to any bright tool but is most effective on drills and taps
- +0.0050 tolerance
Specifications
ApplicationFor reaming holes without interrupted cuts such as keyways and cross sections
Type Conical Square Drive
Series B301
Taper Pin Size/Numbe 3/32 in
Reamer Diameter 2.38 mm
Small End Diameter 1.75 mm
Overall Length 57 mm
Shank Type Square
Shank Diameter 2.41 mm
Number of Flutes 4