Simpson Strong-Tie SIMS AT-XP10

Simpson Strong-Tie Strong-Rod Acrylic Adhesive, High Strength, Series: AT-XP, Coaxial Cartridge Container, 9.4 oz Container, Acrylic Glass Base, Composition: (Resin Teal Side)-Portland Cement, Calcined Clay, Ethoxylated Bisphenol-A Dimethacrylate, Propylidynetimethyl Trimethyl Trimethacrylate, Crystalline Silica, Quartz, Tetrahydrofurfuryl Methacrylate, (Initiator White or Tan Side)-Dibenzoyl Peroxide, White Mineral Oil, Titanium Dioxide, Kaolin, Silicon Dioxide, Liquid/Paste Form, 24 hr Curing, Teal/Tan/White, 1.58 Specific Gravity, >200/159 deg F Flash Point, 0.4173611111 Mixing Ratio, 30 g/L VOC, Applicable Materials: Grouted Concrete Block, Cracked Concrete, Dry/Water Saturated Concrete and Masonry

• Features

• Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
• Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
• Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
• 10:1 two-component high strength, acrylic-based anchoring adhesive
• Easy hole cleaning procedure no power-brushing required
• For best results store between 14 to 80 deg F
• Cures in substrate temperatures as low as 14 deg F in 24 hrs or less
• Threaded rod anchoring and rebar doweling into concrete and masonry
• Suitable for horizontal, vertical and overhead applications
• Surfaces to receive adhesive must be clean

Specifications

Documents

• Sds

• Video Link